Custom dieline making

Custom Dieline Making

Illustrative flat tuck-end box dieline template with navy cut lines, dashed fold lines and gold bleed lines
Diagram — not to scale

Custom dielines made to your exact box size, board and printer specification.

Start a project

At a glance

A custom dieline is a flat, technical template for a box, made to your exact dimensions. It shows the printer where to cut, where to crease, where to fold, and where artwork must bleed past the trim. Backbone Graphics makes dielines for individual boxes and for full packaging ranges, so artwork lands exactly where it should after the box is folded and glued.

Diagram — not to scale. Solid navy line: cut · Dashed navy line: fold / crease · Gold dashed line: bleed. Work from the supplied dieline file for production.

What makes a dieline usable

A dieline is only useful if a printer can work from it without guessing. That means correct internal dimensions for the product, sensible flap and glue tab sizes, clear marking of cut versus crease versus fold lines, and bleed that matches the printer's requirement. It also means the dieline matches the board you are actually using — a thick corrugated board folds differently from a thin folding carton board, and the dieline has to allow for that.

We make dielines from your measurements, from a physical sample, or from your printer's specification. If you send a sample box, we can work from its measurements and structure. If you send a printer's template, we can adapt artwork to it or rebuild it cleanly.

Dieline types covered

Tuck-end, reverse tuck-end, straight tuck-end, auto-bottom and crash-lock, snap-lock, mailer boxes, corrugated boxes, rigid boxes, sleeves and trays, and ECMA and FEFCO standard structures where a standard code fits your product. Each type is explained on its own page in the dieline section, with what it is best for and what to watch for.

Related: Dieline guides · Packaging design · Prepress & print-ready files

Start a project

Frequently asked questions

What is a dieline?

A flat template showing the outline of a box, its fold and crease lines, and its glue areas. Printers cut and fold along it, and designers place artwork on it.

What do you need from me to make a dieline?

Product dimensions, board type if known, quantity, and your printer's specification if you have one. A photo or sample of a similar box also helps.

What file format will I receive?

Usually AI, PDF and EPS, with layers for cut, crease, fold and bleed, so your printer and designer can work from the same file.

Can you make a dieline for an unusual box shape?

Yes, if the shape can be cut, folded and glued in practice. If a shape will not work in production, we will say so and suggest a workable alternative.

How do I order a dieline?

Email hello@backbonegraphics.com (to be confirmed) with your box type, internal dimensions and printer details.

Start a project

Tell us about your product, pack type and quantity.

Start a project